Total 2,605 service engineer job vacancies in Art / Design / Entertainment category in Malaysia

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities:

• Lead projects for infrastructure operations, including Service Desk, Windows/Linux environments, VMware, and storage systems.
• Contribute to solution design and engineering in areas like Service Desk, Windows/Linux operations, VMware, and storage.
• Support VMware 6.x and above, specializing in vSphere, vRealize Operations, and Horizon.
• Collaborate with Information Security for compliance with audit requirements.
• Design and implement disaster recovery solutions and redundant technology.

Requirements:

• Demonstrated success in implementing comprehensive technology systems for corporate business operations.
• Extensive proficiency in technology, including design, delivery, and support.
• Preferred expertise in VMware and Microsoft.
• Proficient in utilizing PowerCLI scripting for both reporting and automation.
• Essential understanding of networks, switches, and SAN, with additional advantageous hardware knowledge.
• Preferably experienced in applying ITIL practices.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Company

An innovative, well established consultancy that owns a large chunk of and has built up an excellent reputation in the local Scottish market. This organisation creates mechanical and electrical design engineering solutions for sectors across the built environment including Education, Commercial, Hotel & Leisure and more. In recent years, sustainability has been at the core of all their projects, building up a strong track record for environmentally friendly and cost-effective engineering solutions. This business is easily one of the most sought after brands in the market, they have an energetic, social culture and are well-known for their supportive, trusting, flexible working environment. They are currently seeking a Senior Electrical Design Engineer to join their Edinburgh office.

Role

• Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems .
• Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc.
• Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, dialux, Amtech, in-house developed tools, etc.
• Representing the organisation at meetings with clients and contractors.
• Site surveys, inspections and monitoring of site works.
• Report and technical note writing.
• Maintaining complete records and archives to company standards.
• Adherence to all quality, environmental and governance processes.

Qualifications/Experience

• Degree qualified, or equivalent qualification, in Building Services Engineering / Electrical Engineering or related subjects.
• Chartered Engineer with CIBSE or IET or working towards this.
• Good level of computer literacy in a range of digital tools such as CAD, Amtech, Relux, package, and Microsoft packages
• Experience working in a design consultancy and/or experience of working within a contractor design environment is essential.
• Have a detailed knowledge of appropriate technical standards.

Benefits

• 24 days holiday + public holidays
• Holiday buy/sell
• Hybrid working
• 7% pension
• Support towards chartership
• Gym discounts

Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

Company

A well-established, high-performing building services engineering consultancy with multiple offices across the UK. Operating as a partnership, this business keeps sustainability at the core of everything they do. They have been in operation for over 50 years, maintaining client relationships through quality and consistency. This business have a solid reputation for creating unique spaces and bringing buildings to life. They have a very healthy pipeline of work and due to continuous growth are seeking a Senior/Electrical Design Engineer to join their Edinburgh office. This company are involved in multiple sectors of work; you will get access to challenging and interesting projects varying in size and scale across Commercial, High-Scale Residential developments, Retail, Industrial.

Role

• Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems .
• Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc.
• Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, dialux, Amtech, in-house developed tools, etc.
• Representing the organisation at meetings with clients and contractors.
• Site surveys, inspections and monitoring of site works.
• Report and technical note writing.
• Maintaining complete records and archives to company standards.
• Adherence to all quality, environmental and governance processes.

Qualifications/Experience

• Degree qualified, or equivalent qualification, in Building Services Engineering / Electrical Engineering or related subjects.
• Chartered Engineer with CIBSE or IET or working towards this. .
• Good level of computer literacy in a range of digital tools such as CAD, Amtech, Relux, package, and Microsoft packages
• Experience working in a design consultancy and/or experience of working within a contractor design environment is essential.
• Have a detailed knowledge of appropriate technical standards.

Benefits

• Hybrid Working (3 Days in Office)
• Flexible Working (35hrs)
• Pension
• Professional Memberships
• Gym Membership
• Cycle to work

Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities:

• Lead projects for infrastructure operations, including Service Desk, Windows/Linux environments, VMware, and storage systems.
• Contribute to solution design and engineering in areas like Service Desk, Windows/Linux operations, VMware, and storage.
• Support VMware 6.x and above, specializing in vSphere, vRealize Operations, and Horizon.
• Collaborate with Information Security for compliance with audit requirements.
• Design and implement disaster recovery solutions and redundant technology.

Requirements:

• Demonstrated success in implementing comprehensive technology systems for corporate business operations.
• Extensive proficiency in technology, including design, delivery, and support.
• Preferred expertise in VMware and Microsoft.
• Proficient in utilizing PowerCLI scripting for both reporting and automation.
• Essential understanding of networks, switches, and SAN, with additional advantageous hardware knowledge.
• Preferably experienced in applying ITIL practices.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Your New Company
We are recruiting on behalf of a well-established firm of mechanical and electrical consulting engineers. This organisation has a strong reputation for innovative engineering design, dynamic project management, and stringent quality control. Their expertise spans a wide range of sectors, including commercial, education, healthcare, historic buildings, and residential projects. They are committed to delivering high-quality, energy-efficient solutions and maintaining the integrity of historic structures while implementing modern mechanical and electrical systems.

Your New Role
Develop and design electrical systems for various building types, ensuring compliance with industry standards and regulations.Produce detailed design packages, including schematics, layouts, and specifications for electrical systems such as lighting, power distribution, fire alarms, and security systems.
Collaborate with multidisciplinary teams to ensure seamless integration of electrical designs with other building services.
Conduct site visits and inspections to ensure the quality and accuracy of electrical installations.
Provide technical support and guidance to junior engineers and other team members.
Participate in project meetings and communicate effectively with clients, contractors, and other stakeholders.
Stay updated with the latest industry trends, technologies, and best practices to continuously improve design processes.
What You'll Need to Succeed

• Proven experience in electrical design engineering, preferably within the building services sector.
• Proficiency in design software such as AutoCAD, Revit, and other relevant tools.
• Strong understanding of electrical design principles, standards, and regulations.
• Excellent problem-solving skills and attention to detail.
• Ability to manage multiple projects and meet deadlines.
• Strong communication and interpersonal skills.

What You'll Get in Return

• £40,00 to £65,000
• 24 days holiday plus bank holidays
• Flexible working
• Exceptional career opportunities
• Training and learning
• Excellent work life balance
• Friendly and supportive team
• Pension
• Childcare vouchers
• Organised team building and social events
• Achievement recognition
• Be a significant part of the team where you matter

What You Need to do Now
Does this sound likesomething you would be interested in or would like to discuss? If so, pleaseclick 'apply now' to forward an up-to-date copy of your CV.
Alternatively, if thisis not for you, but would like to explore other opportunities then please callme on 0121 236 6160.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk