Total 15 job vacancies by Kmc O&m Pte. Ltd.

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Job Description

• Plan and supervise the maintenance team in the execution of assigned plant maintenance activities within schedule and cost, in compliance with regulatory and company's standards and requirements, in particular company's safety standards, as well as to develop staff capabilities using appropriate capability interventions and on-the-job training
• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation
• Supervise preventive and corrective maintenance carried out for all plant equipment and plant utilities
• Perform frontline troubleshooting on plant equipment defects and failure to maintain high availability
• Provide necessary guidance and advice to maintenance staff or external contractor to execute the maintenance work in a good engineering manner
• Daily maintenance manpower planning and allocation
• Maintain and update maintenance data and maintenance record for all plant equipment and plant utilities
• Check that PPE are provided and subordinates are utilizing it by executing works with all safety precautions
• Additional tasks and responsibilities given by power plant management

Job Requirements

• Degree in Engineering
• Minimum 5 years work experience with equipment related to craft
• Knowledge in craft eg, Pumps, Compressors, HRSG , Valves , Fans and etc
• Experience involvement in technical aspects of Power Plant or Process Plant maintenance
• Good hands-on knowledge in performing Power Plant or Process Plant equipment maintenance
• Experience in the erection, commissioning and initial start-up phases of a modern Power Plant is an advantage
• Knowledge on system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on vibration monitoring and alignment of rotating equipment
• Knowledge on lubrication
• Knowledge in maintaining maintenance record in CMMS

Job Description

• Operate the power plant according to procedures and technical requirements but not limited to starting up and shutting down the entire plant and plant auxiliary systems.
• Support the ASCE/SCE/PSCE/SM to meet the contractual, technical, and commercial set-up and operation of the Power Station.
• Have adequate knowledge of the safe operating parameters, controls, precaution, and safety interlocks when operating plant equipment. in the most efficient manner.
• Support team leader for plant process conditions troubleshooting, analyzing, and testing when necessary.
• Able to manage, monitoring and control the plant process operation from DCS in main control room.
• Responsible for daily plant operations activities, operating data recording; report defects and abnormalities according to approved work instructions.
• Responsible for safe execution of mechanical and electrical. Isolation/Normalization of equipment as required by the Permit To Work.
• Understand and familiar with plant chemistry including handling water treatment plant and electro-chlorination plant operations.
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices.
• Support the shift team in monitoring the running unit performance and maintaining optimum operations efficiency.
• Assist to implement a Quality Management System as applied to the Power Station.
• To assist fully with and help implement and manage all Health, Safety and Environmental practices.
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE/SM.
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time.

Job Requirements

• Higher National Diploma or Certificate is preferred in a relevant engineering discipline. Relevant Competency certificate as issued by the Singapore regulatory authority, or education leading to this.
• Preferably Diploma or technical certification in Mechanical/Electrical Engineering, or equivalent qualifications. Higher NITEC candidates may also be considered.
• Diploma holder with 2-3 years’ experience in Combined Cycle Power Plants or related industries.
• Higher NITEC with 3-5 years’ experience in Combined Cycle Power Plants or related industries.
• Fresh graduates are encouraged to apply.
• Preferably understanding, knowledge and experience of Combined Cycle Power Station operations. Basic knowledge of Power Station commercial operation. Basic understanding of CCPP performance optimization.
• Candidates with steam boiler attendant or engineer certificate of competency will be an advantage.
• Self-motivated, independent, possess a good communication skill, and is a team player.
• Possess good knowledge & experience of plant processes and operations.
• Knowledge and experience in Health, Safety and Environmental practices.

Job Responsibilities

• Assist Shift Manager to ensure safe shift operation of the assigned plant and manage non-operating activities and co-ordination with internal and external stakeholders on operating requirements to facilitate the smooth operation of the power plants and in compliance with regulatory and company standards and requirements
• Become a pro-active member of the Station Team
• Support the SCE; PSCE and Operations Manager to meet the contractual, technical and commercial set-up and operation of the Power Station
• Input to and liaison with the relevant Managers for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Act as Senior Authorized Person (SAP) in preparing, reviewing and issuing PTW (Permit To Work)
• Able to support the team during plant emergency situations and abnormal conditions
• To assist operation team to comply with PSO/SPPG/NGCC requirements and procedures
• To support SCE/PSCE to ensure plant load output according to Trader dispatch schedule
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Able to manage, monitoring and control the plant process operation from control room DCS
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the Operations Manager, PSCE and SCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• A Degree in Mechanical / Electrical / Control & Instrumentation Engineering preferred. Candidates with Diploma or NITEC qualifications with substantial experience in a similar role will be considered
• Minimum 6 years of Lead Technical Officer/ Operations Engineer ground experience in Power Station Operations on a CCPP
• Solid understanding, knowledge and experience of Combined Cycle Power Station operations
• Good understanding of Power Station commercial operation strategies in a deregulated electricity market and familiar with CCPP and Cogen performance analysis and optimisation
• General understanding of Power Station engineering design and construction is essential. Prior involvement in the technical and maintenance aspects of Gas Turbines and in the erection, commissioning and initial start-up phases of a modern Power Station will be valuable
• Strong safety mindset with detailed knowledge and experience in modern Health, Safety and Environmental practices
• Strong team-player with the ability to lead a specialist shift team and manage numerous personnel during critical plant outage periods

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Job Description

• Plan and supervise the maintenance team in the execution of assigned plant maintenance activities within schedule and cost, in compliance with regulatory and company's standards and requirements, in particular company's safety standards, as well as to develop staff capabilities using appropriate capability interventions and on-the-job training
• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation
• Supervise preventive and corrective maintenance carried out for all plant equipment and plant utilities
• Perform frontline troubleshooting on plant equipment defects and failure to maintain high availability
• Provide necessary guidance and advice to maintenance staff or external contractor to execute the maintenance work in a good engineering manner
• Daily maintenance manpower planning and allocation
• Maintain and update maintenance data and maintenance record for all plant equipment and plant utilities
• Check that PPE are provided and subordinates are utilizing it by executing works with all safety precautions
• Additional tasks and responsibilities given by power plant management

Job Requirements

• Degree in Engineering
• Minimum 5 years work experience with equipment related to craft
• Knowledge in craft eg, Pumps, Compressors, HRSG , Valves , Fans and etc
• Experience involvement in technical aspects of Power Plant or Process Plant maintenance
• Good hands-on knowledge in performing Power Plant or Process Plant equipment maintenance
• Experience in the erection, commissioning and initial start-up phases of a modern Power Plant is an advantage
• Knowledge on system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on vibration monitoring and alignment of rotating equipment
• Knowledge on lubrication
• Knowledge in maintaining maintenance record in CMMS

Job Description

• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation.
• Prepare the scope of works for electrical services, specifications of spare parts for the maintenance work.
• Maintain and updated all the drawings, data and maintenance record for all electrical equipment and plant utilities in Power Plant.
• Ensure the proper preventive, corrective and condition-based maintenance (including emergency situation) carried out for all electrical equipment and plant utilities in the Power Plant.
• Perform technical evaluation on external service engagement and material purchase.
• Assist in preparation of the annually maintenance budgetary cost on electrical equipment and plant utilities.
• Provide necessary guidance and advice to maintenance staff to ensure the quality maintenance is carried out as per good engineering practice.
• Ensures that subordinates are adequately trained and recommends necessary training.
• Ensure PPE are provided, and subordinates are utilizing it by executing works with all safety precautions.
• Ensure all Power Plant jobs executed are in line with statutory requirements of concerned authorities and power plant policies and procedures.

Job Requirements

• Possess a Bachelor Degree in Electrical Engineering
• At least 3 years of relevant working experience in Power Plant Maintenance ideally on a CCPP
• Involvement in technical aspects of Power Plant maintenance
• Experience in the erection, testing and commissioning, and initial start-up phases of a modern Power Plant
• Knowledge on electrical system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on electromagnetic rotating equipment
• Knowledge on protection relays
• Knowledge on electrical equipment, i.e. GIS, MV/LV switchgear, transformer, generator, Automatic Voltage Regulator, Uninterruptable Power Supply, VFD, DC System-Battery and charger, HVAC, Communication System, etc
• Knowledge on control circuitry of power plant electrical system
• Knowledge in maintaining maintenance record in CMMS

Job Description

• Plan and supervise the maintenance team in the execution of assigned plant maintenance activities within schedule and cost, in compliance with regulatory and company's standards and requirements, in particular company's safety standards, as well as to develop staff capabilities using appropriate capability interventions and on-the-job training
• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation
• Supervise preventive and corrective maintenance carried out for all plant equipment and plant utilities
• Perform frontline troubleshooting on plant equipment defects and failure to maintain high availability
• Provide necessary guidance and advice to maintenance staff or external contractor to execute the maintenance work in a good engineering manner
• Daily maintenance manpower planning and allocation
• Maintain and update maintenance data and maintenance record for all plant equipment and plant utilities
• Check that PPE are provided and subordinates are utilizing it by executing works with all safety precautions
• Additional tasks and responsibilities given by power plant management

Job Requirements

• Degree in Engineering
• Minimum 5 years work experience with equipment related to craft
• Knowledge in craft eg, Pumps, Compressors, HRSG , Valves , Fans and etc
• Experience involvement in technical aspects of Power Plant or Process Plant maintenance
• Good hands-on knowledge in performing Power Plant or Process Plant equipment maintenance
• Experience in the erection, commissioning and initial start-up phases of a modern Power Plant is an advantage
• Knowledge on system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on vibration monitoring and alignment of rotating equipment
• Knowledge on lubrication
• Knowledge in maintaining maintenance record in CMMS

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Job Description

• Operate the power plant according to procedures and technical requirements but not limited to starting up and shutting down the entire plant and plant auxiliary systems.
• Support the ASCE/SCE/PSCE/SM to meet the contractual, technical, and commercial set-up and operation of the Power Station.
• Have adequate knowledge of the safe operating parameters, controls, precaution, and safety interlocks when operating plant equipment. in the most efficient manner.
• Support team leader for plant process conditions troubleshooting, analyzing, and testing when necessary.
• Able to manage, monitoring and control the plant process operation from DCS in main control room.
• Responsible for daily plant operations activities, operating data recording; report defects and abnormalities according to approved work instructions.
• Responsible for safe execution of mechanical and electrical. Isolation/Normalization of equipment as required by the Permit To Work.
• Understand and familiar with plant chemistry including handling water treatment plant and electro-chlorination plant operations.
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices.
• Support the shift team in monitoring the running unit performance and maintaining optimum operations efficiency.
• Assist to implement a Quality Management System as applied to the Power Station.
• To assist fully with and help implement and manage all Health, Safety and Environmental practices.
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE/SM.
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time.

Job Requirements

• Higher National Diploma or Certificate is preferred in a relevant engineering discipline. Relevant Competency certificate as issued by the Singapore regulatory authority, or education leading to this.
• Preferably Diploma or technical certification in Mechanical/Electrical Engineering, or equivalent qualifications. Higher NITEC candidates may also be considered.
• Diploma holder with 2-3 years’ experience in Combined Cycle Power Plants or related industries.
• Higher NITEC with 3-5 years’ experience in Combined Cycle Power Plants or related industries.
• Fresh graduates are encouraged to apply.
• Preferably understanding, knowledge and experience of Combined Cycle Power Station operations. Basic knowledge of Power Station commercial operation. Basic understanding of CCPP performance optimization.
• Candidates with steam boiler attendant or engineer certificate of competency will be an advantage.
• Self-motivated, independent, possess a good communication skill, and is a team player.
• Possess good knowledge & experience of plant processes and operations.
• Knowledge and experience in Health, Safety and Environmental practices.

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Job Responsibilities

• Plan and supervise the maintenance team in the execution of assigned plant maintenance activities within schedule and cost, in compliance with regulatory and company's standards and requirements, in particular company's safety standards, as well as to develop staff capabilities using appropriate capability interventions and on-the-job training
• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation
• Supervise preventive and corrective maintenance carried out for all plant equipment and plant utilities
• Perform frontline troubleshooting on plant equipment defects and failure to maintain high availability
• Provide necessary guidance and advice to maintenance staff or external contractor to execute the maintenance work in a good engineering manner
• Daily maintenance manpower planning and allocation
• Maintain and update maintenance data and maintenance record for all plant equipment and plant utilities
• Check that PPE are provided and subordinates are utilizing it by executing works with all safety precautions
• Additional tasks and responsibilities given by power plant management

Job Requirements

• Degree in Engineering
• Minimum 5 years work experience with equipment related to craft
• Knowledge in craft eg, Pumps, Compressors, HRSG , Valves , Fans and etc
• Experience involvement in technical aspects of Power Plant or Process Plant maintenance
• Good hands-on knowledge in performing Power Plant or Process Plant equipment maintenance
• Experience in the erection, commissioning and initial start-up phases of a modern Power Plant is an advantage
• Knowledge on system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on vibration monitoring and alignment of rotating equipment
• Knowledge on lubrication
• Knowledge in maintaining maintenance record in CMMS